1

Тема: Блютуз

Не пашет, хотя устройство (мобилу) обнаруживает. Блютуз юсбишный.
Вывод

+ открыть спойлер

# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 Debian 3.2.41-2
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI:    /AB52P, BIOS 6.00 PG 05/23/2003
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-F7FFF uncachable
[    0.000000]   F8000-FBFFF write-through
[    0.000000]   FC000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f4ea0] f4ea0
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fa000-1800000
[    0.000000] RAMDISK: 36c2e000 - 3760f000
[    0.000000] ACPI: RSDP 000f68e0 00014 (v00 IntelR)
[    0.000000] ACPI: RSDT 3fff3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 3fff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 3fff30c0 03DCF (v01 INTELR AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 3fff0000 00040
[    0.000000] ACPI: APIC 3fff6ec0 0005C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fff0
[    0.000000] On node 0 totalpages: 262015
[    0.000000] free_area_init_node: node 0, pgdat c13c5938, node_mem_map f642e200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34530 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259967
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=c6c020f1-e075-432e-9c3d-afce906c873d ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fff0)
[    0.000000] Memory: 1024028k/1048512k available (2590k kernel code, 24032k reserved, 1299k data, 452k init, 139208k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa1000 - 0xfffff000   ( 376 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13cd000 - 0xc143e000   ( 452 kB)
[    0.000000]       .data : 0xc12878ec - 0xc13cc580   (1299 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12878ec   (2590 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1992.313 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.62 BogoMIPS (lpj=7969252)
[    0.008014] pid_max: default: 32768 minimum: 301
[    0.008085] Security Framework initialized
[    0.008098] AppArmor: AppArmor disabled by boot time parameter
[    0.008124] Mount-cache hash table entries: 512
[    0.008323] Initializing cgroup subsys cpuacct
[    0.008336] Initializing cgroup subsys memory
[    0.008350] Initializing cgroup subsys devices
[    0.008354] Initializing cgroup subsys freezer
[    0.008358] Initializing cgroup subsys net_cls
[    0.008362] Initializing cgroup subsys blkio
[    0.008374] Initializing cgroup subsys perf_event
[    0.008450] CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
[    0.009230] ACPI: Core revision 20110623
[    0.016146] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.016167] ... version:                0
[    0.016171] ... bit width:              40
[    0.016174] ... generic registers:      18
[    0.016177] ... value mask:             000000ffffffffff
[    0.016180] ... max period:             0000007fffffffff
[    0.016183] ... fixed-purpose events:   0
[    0.016186] ... event mask:             000000000003ffff
[    0.016546] NMI watchdog enabled, takes one hw-pmu counter.
[    0.016664] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.017050] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.060003] devtmpfs: initialized
[    0.060003] PM: Registering ACPI NVS region at 3fff0000 (12288 bytes)
[    0.060003] print_constraints: dummy:
[    0.060003] NET: Registered protocol family 16
[    0.060003] EISA bus registered
[    0.060003] ACPI: bus type pci registered
[    0.086928] PCI: PCI BIOS revision 2.10 entry at 0xfb020, last bus=2
[    0.086934] PCI: Using configuration type 1 for base access
[    0.088353] bio: create slab <bio-0> at 0
[    0.088583] ACPI: Added _OSI(Module Device)
[    0.088592] ACPI: Added _OSI(Processor Device)
[    0.088598] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.088605] ACPI: Added _OSI(Processor Aggregator Device)
[    0.089464] ACPI: EC: Look up EC in DSDT
[    0.094369] ACPI: Interpreter enabled
[    0.094385] ACPI: (supports S0 S1 S4 S5)
[    0.094441] ACPI: Using IOAPIC for interrupt routing
[    0.103524] ACPI: No dock devices found.
[    0.103533] HEST: Table not found.
[    0.103543] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.103706] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.104088] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.104095] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.104101] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.104106] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.104111] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.104138] pci 0000:00:00.0: [8086:1a30] type 0 class 0x000600
[    0.104153] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
[    0.104237] pci 0000:00:01.0: [8086:1a31] type 1 class 0x000604
[    0.104322] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.104385] pci 0000:00:1f.0: [8086:2440] type 0 class 0x000601
[    0.104473] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[    0.104482] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
[    0.104508] pci 0000:00:1f.1: [8086:244b] type 0 class 0x000101
[    0.104567] pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
[    0.104622] pci 0000:00:1f.3: [8086:2443] type 0 class 0x000c05
[    0.104680] pci 0000:00:1f.3: reg 20: [io  0x5000-0x500f]
[    0.104734] pci 0000:00:1f.5: [8086:2445] type 0 class 0x000401
[    0.104754] pci 0000:00:1f.5: reg 10: [io  0xdc00-0xdcff]
[    0.104768] pci 0000:00:1f.5: reg 14: [io  0xe000-0xe03f]
[    0.104866] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300
[    0.104889] pci 0000:01:00.0: reg 10: [mem 0xec000000-0xecffffff]
[    0.104901] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xe7ffffff pref]
[    0.104942] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.105026] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.105034] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xedffffff]
[    0.105041] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.105076] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[    0.105102] pci 0000:02:01.0: reg 10: [io  0xc000-0xc0ff]
[    0.105116] pci 0000:02:01.0: reg 14: [mem 0xef000000-0xef0000ff]
[    0.105165] pci 0000:02:01.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.105202] pci 0000:02:01.0: supports D1 D2
[    0.105206] pci 0000:02:01.0: PME# supported from D1 D2 D3hot
[    0.105244] pci 0000:02:06.0: [1106:3038] type 0 class 0x000c03
[    0.105303] pci 0000:02:06.0: reg 20: [io  0xc400-0xc41f]
[    0.105357] pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
[    0.105385] pci 0000:02:06.1: [1106:3038] type 0 class 0x000c03
[    0.105443] pci 0000:02:06.1: reg 20: [io  0xc800-0xc81f]
[    0.105497] pci 0000:02:06.1: PME# supported from D0 D3hot D3cold
[    0.105532] pci 0000:02:06.2: [1106:3104] type 0 class 0x000c03
[    0.105556] pci 0000:02:06.2: reg 10: [mem 0xef001000-0xef0010ff]
[    0.105646] pci 0000:02:06.2: PME# supported from D0 D3hot D3cold
[    0.105702] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.105709] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.105719] pci 0000:00:1e.0:   bridge window [mem 0xee000000-0xefffffff]
[    0.105727] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.105732] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.105750] pci_bus 0000:00: on NUMA node 0
[    0.105762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.105976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.106351]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.122462] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.122611] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.122753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.122897] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.123039] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.123185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.123332] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.123478] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.123771] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.123782] vgaarb: loaded
[    0.123787] vgaarb: bridge control possible 0000:01:00.0
[    0.123896] PCI: Using ACPI for IRQ routing
[    0.123906] PCI: pci_cache_line_size set to 64 bytes
[    0.123979] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.123985] reserve RAM buffer: 000000003fff0000 - 000000003fffffff
[    0.126953] pnp: PnP ACPI init
[    0.126998] ACPI: bus type pnp registered
[    0.127345] pnp 00:00: [mem 0x000cf000-0x000cffff]
[    0.127352] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[    0.127356] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[    0.127362] pnp 00:00: [mem 0x000fc000-0x000fffff]
[    0.127366] pnp 00:00: [mem 0x3fff0000-0x3fffffff]
[    0.127371] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.127375] pnp 00:00: [mem 0x00100000-0x3ffeffff]
[    0.127379] pnp 00:00: [mem 0xfec00000-0xfec00fff]
[    0.127383] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.127395] pnp 00:00: [mem 0xffb00000-0xffb7ffff]
[    0.127399] pnp 00:00: [mem 0xfff00000-0xffffffff]
[    0.127405] pnp 00:00: [mem 0x000e0000-0x000effff]
[    0.127533] system 00:00: [mem 0x000cf000-0x000cffff] has been reserved
[    0.127541] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.127547] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.127552] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.127558] system 00:00: [mem 0x3fff0000-0x3fffffff] could not be reserved
[    0.127564] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.127570] system 00:00: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.127577] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.127582] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.127588] system 00:00: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.127594] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
[    0.127599] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
[    0.127608] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.127760] pnp 00:01: [bus 00-ff]
[    0.127767] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.127773] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.127778] pnp 00:01: [io  0x0d00-0xffff window]
[    0.127782] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.127789] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[    0.127793] pnp 00:01: [mem 0x40000000-0xfebfffff window]
[    0.127908] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.128089] pnp 00:02: [io  0x4000-0x40bf]
[    0.128223] system 00:02: [io  0x4000-0x40bf] could not be reserved
[    0.128234] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128656] pnp 00:03: [io  0x0010-0x001f]
[    0.128662] pnp 00:03: [io  0x0022-0x003f]
[    0.128666] pnp 00:03: [io  0x0044-0x005f]
[    0.128671] pnp 00:03: [io  0x0062-0x0063]
[    0.128675] pnp 00:03: [io  0x0065-0x006f]
[    0.128679] pnp 00:03: [io  0x0074-0x007f]
[    0.128683] pnp 00:03: [io  0x0091-0x0093]
[    0.128687] pnp 00:03: [io  0x00a2-0x00bf]
[    0.128691] pnp 00:03: [io  0x00e0-0x00ef]
[    0.128695] pnp 00:03: [io  0x04d0-0x04d1]
[    0.128699] pnp 00:03: [io  0x0290-0x029f]
[    0.128703] pnp 00:03: [io  0x0800-0x0805]
[    0.128854] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.128861] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.128873] system 00:03: [io  0x0800-0x0805] has been reserved
[    0.128883] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.128927] pnp 00:04: [dma 4]
[    0.128933] pnp 00:04: [io  0x0000-0x000f]
[    0.128937] pnp 00:04: [io  0x0080-0x0090]
[    0.128941] pnp 00:04: [io  0x0094-0x009f]
[    0.128945] pnp 00:04: [io  0x00c0-0x00df]
[    0.129041] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.129083] pnp 00:05: [io  0x0070-0x0073]
[    0.129106] pnp 00:05: [irq 8]
[    0.129202] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.129239] pnp 00:06: [io  0x0061]
[    0.129334] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.129373] pnp 00:07: [io  0x00f0-0x00ff]
[    0.129390] pnp 00:07: [irq 13]
[    0.129490] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.129811] pnp 00:08: [io  0x03f0-0x03f5]
[    0.129817] pnp 00:08: [io  0x03f7]
[    0.129833] pnp 00:08: [irq 6]
[    0.129838] pnp 00:08: [dma 2]
[    0.129981] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.130376] pnp 00:09: [io  0x03f8-0x03ff]
[    0.130394] pnp 00:09: [irq 4]
[    0.130586] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.131018] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.131037] pnp 00:0a: [irq 3]
[    0.131224] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.132063] pnp 00:0b: [io  0x0378-0x037f]
[    0.132071] pnp 00:0b: [io  0x0778-0x077b]
[    0.132089] pnp 00:0b: [irq 7]
[    0.132093] pnp 00:0b: [dma 3]
[    0.132289] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.132443] pnp 00:0c: [irq 12]
[    0.132559] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.132648] pnp 00:0d: [io  0x0060]
[    0.132654] pnp 00:0d: [io  0x0064]
[    0.132669] pnp 00:0d: [irq 1]
[    0.132791] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.133221] pnp 00:0e: [io  0x0330-0x0331]
[    0.133241] pnp 00:0e: [irq 10]
[    0.133404] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.133769] pnp 00:0f: [io  0x0201]
[    0.133906] pnp 00:0f: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.133930] pnp: PnP ACPI: found 16 devices
[    0.133935] ACPI: ACPI bus type pnp unregistered
[    0.133943] PnPBIOS: Disabled by ACPI PNP
[    0.174909] Switching to clocksource acpi_pm
[    0.174937] PCI: max bus depth: 1 pci_try_num: 2
[    0.174977] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref]
[    0.174986] pci 0000:01:00.0: BAR 6: assigned [mem 0xed000000-0xed01ffff pref]
[    0.174992] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.175000] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xedffffff]
[    0.175006] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe7ffffff pref]
[    0.175016] pci 0000:02:01.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]
[    0.175021] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.175029] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.175037] pci 0000:00:1e.0:   bridge window [mem 0xee000000-0xefffffff]
[    0.175044] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x400fffff pref]
[    0.175072] pci 0000:00:1e.0: setting latency timer to 64
[    0.175079] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.175084] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.175089] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
[    0.175093] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
[    0.175098] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.175102] pci_bus 0000:02: resource 1 [mem 0xee000000-0xefffffff]
[    0.175106] pci_bus 0000:02: resource 2 [mem 0x40000000-0x400fffff pref]
[    0.175111] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.175115] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.175209] NET: Registered protocol family 2
[    0.175333] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.175916] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.175916] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[    0.175916] TCP: Hash tables configured (established 131072 bind 65536)
[    0.175916] TCP reno registered
[    0.175916] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.175916] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.175916] NET: Registered protocol family 1
[    0.175916] pci 0000:01:00.0: Boot video device
[    0.175916] PCI: CLS 32 bytes, default 64
[    0.175925] Unpacking initramfs...
[    0.782149] Freeing initrd memory: 10116k freed
[    0.803073] audit: initializing netlink socket (disabled)
[    0.803103] type=2000 audit(1369725482.800:1): initialized
[    0.822126] highmem bounce pool size: 64 pages
[    0.822141] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.822456] VFS: Disk quotas dquot_6.5.2
[    0.822507] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.822645] msgmni has been set to 1747
[    0.823097] alg: No test for stdrng (krng)
[    0.823197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.823206] io scheduler noop registered
[    0.823211] io scheduler deadline registered
[    0.823238] io scheduler cfq registered (default)
[    0.823486] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.823545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.823550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.824246] ERST: Table is not found!
[    0.824252] GHES: HEST is not enabled!
[    0.824286] isapnp: Scanning for PnP cards...
[    1.178359] isapnp: No Plug & Play device found
[    1.178552] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.198960] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.219412] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.240434] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.261029] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.261521] Linux agpgart interface v0.103
[    1.261751] agpgart-intel 0000:00:00.0: Intel i845 Chipset
[    1.265677] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[    1.266021] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.269476] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.269496] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.269870] mousedev: PS/2 mouse device common for all mice
[    1.269998] rtc_cmos 00:05: RTC can wake from S4
[    1.270218] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.270256] rtc0: alarms up to one month, 242 bytes nvram
[    1.270404] EISA: Probing bus 0 at eisa.0
[    1.270431] Cannot allocate resource for EISA slot 4
[    1.270435] Cannot allocate resource for EISA slot 5
[    1.270451] EISA: Detected 0 cards.
[    1.270458] cpuidle: using governor ladder
[    1.270461] cpuidle: using governor menu
[    1.270843] TCP cubic registered
[    1.270918] NET: Registered protocol family 10
[    1.271853] Mobile IPv6
[    1.271864] NET: Registered protocol family 17
[    1.271883] Registering the dns_resolver key type
[    1.271917] Using IPI Shortcut mode
[    1.272305] PM: Hibernation image not present or could not be loaded.
[    1.272335] registered taskstats version 1
[    1.272655] rtc_cmos 00:05: setting system clock to 2013-05-28 07:18:03 UTC (1369725483)
[    1.272724] Initializing network drop monitor service
[    1.273009] Freeing unused kernel memory: 452k freed
[    1.273842] Write protecting the kernel text: 2592k
[    1.273875] Write protecting the kernel read-only data: 1040k
[    1.290998] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.320554] udevd[42]: starting version 175
[    1.475627] ACPI: Fan [FAN] (on)
[    1.491677] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.491725] 8139cp 0000:02:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.509125] thermal LNXTHERM:00: registered as thermal_zone0
[    1.509133] ACPI: Thermal Zone [THRM] (40 C)
[    1.572542] SCSI subsystem initialized
[    1.590840] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.609630] 8139too 0000:02:01.0: eth0: RealTek RTL8139 at 0xc000, 00:e0:4c:f5:f2:ab, IRQ 18
[    1.631914] FDC 0 is a post-1991 82077
[    1.647521] usbcore: registered new interface driver usbfs
[    1.647583] usbcore: registered new interface driver hub
[    1.665998] usbcore: registered new device driver usb
[    1.667026] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.667134] ehci_hcd 0000:02:06.2: EHCI Host Controller
[    1.667190] ehci_hcd 0000:02:06.2: new USB bus registered, assigned bus number 1
[    1.667277] ehci_hcd 0000:02:06.2: irq 18, io mem 0xef001000
[    1.674474] libata version 3.00 loaded.
[    1.675448] ata_piix 0000:00:1f.1: version 2.13
[    1.675568] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.676089] ehci_hcd 0000:02:06.2: USB 2.0 started, EHCI 0.95
[    1.676169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.676177] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.676181] usb usb1: Product: EHCI Host Controller
[    1.676185] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[    1.676189] usb usb1: SerialNumber: 0000:02:06.2
[    1.676524] hub 1-0:1.0: USB hub found
[    1.676539] hub 1-0:1.0: 4 ports detected
[    1.691304] scsi0 : ata_piix
[    1.696105] scsi1 : ata_piix
[    1.697349] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    1.697357] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    1.702827] uhci_hcd: USB Universal Host Controller Interface driver
[    1.702944] uhci_hcd 0000:02:06.0: UHCI Host Controller
[    1.702981] uhci_hcd 0000:02:06.0: new USB bus registered, assigned bus number 2
[    1.703045] uhci_hcd 0000:02:06.0: irq 16, io base 0x0000c400
[    1.703140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.703147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.703151] usb usb2: Product: UHCI Host Controller
[    1.703155] usb usb2: Manufacturer: Linux 3.2.0-4-486 uhci_hcd
[    1.703158] usb usb2: SerialNumber: 0000:02:06.0
[    1.704404] hub 2-0:1.0: USB hub found
[    1.704424] hub 2-0:1.0: 2 ports detected
[    1.704611] uhci_hcd 0000:02:06.1: UHCI Host Controller
[    1.704645] uhci_hcd 0000:02:06.1: new USB bus registered, assigned bus number 3
[    1.704699] uhci_hcd 0000:02:06.1: irq 17, io base 0x0000c800
[    1.704775] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.704781] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.704785] usb usb3: Product: UHCI Host Controller
[    1.704789] usb usb3: Manufacturer: Linux 3.2.0-4-486 uhci_hcd
[    1.704793] usb usb3: SerialNumber: 0000:02:06.1
[    1.716210] hub 3-0:1.0: USB hub found
[    1.716225] hub 3-0:1.0: 2 ports detected
[    1.820079] Refined TSC clocksource calibration: 1992.613 MHz.
[    1.820090] Switching to clocksource tsc
[    1.872509] ata1.00: HPA detected: current 400000000, native 488397168
[    1.872521] ata1.00: ATA-7: SAMSUNG HD252HJ, 1AC01118, max UDMA7
[    1.872528] ata1.00: 400000000 sectors, multi 16: LBA48
[    1.880399] ata1.00: configured for UDMA/100
[    1.880678] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD252HJ  1AC0 PQ: 0 ANSI: 5
[    1.884532] ata2.00: ATA-7: Maxtor 2F020J0, VAM51JJ0, max UDMA/133
[    1.884541] ata2.00: 40718160 sectors, multi 16: LBA
[    1.884554] ata2.01: ATAPI: HL-DT-STDVD-RAM GH22NP21, 1.10, max UDMA/66
[    1.892438] ata2.00: configured for UDMA/100
[    1.908265] ata2.01: configured for UDMA/66
[    1.909518] scsi 1:0:0:0: Direct-Access     ATA      Maxtor 2F020J0   VAM5 PQ: 0 ANSI: 5
[    1.911558] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP21 1.10 PQ: 0 ANSI: 5
[    1.955929] sd 0:0:0:0: [sda] 400000000 512-byte logical blocks: (204 GB/190 GiB)
[    1.956188] sd 0:0:0:0: [sda] Write Protect is off
[    1.956197] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.956287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.958575] sd 1:0:0:0: [sdb] 40718160 512-byte logical blocks: (20.8 GB/19.4 GiB)
[    1.958782] sd 1:0:0:0: [sdb] Write Protect is off
[    1.958791] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.958881] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.968221] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.968550] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.968855] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    1.977245]  sda: sda1 sda2 < sda5 >
[    1.978763] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.376035] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    2.614012] usb 2-1: New USB device found, idVendor=093a, idProduct=2626
[    2.614020] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.856036] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.976032] usb 3-2: device descriptor read/64, error -71
[    3.200033] usb 3-2: device descriptor read/64, error -71
[    3.377202]  sdb: sdb1 sdb2 < sdb5 >
[    3.378405] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.378414] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.378767] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    3.382134] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.416069] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    3.540139] usb 3-2: device descriptor read/64, error -71
[    3.764059] usb 3-2: device descriptor read/64, error -71
[    3.952641] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x11
[    3.964975] platform microcode: firmware: agent loaded intel-ucode/0f-02-09 into memory
[    3.965436] microcode: CPU0 updated to revision 0x2e, date = 2004-08-11
[    3.966842] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.980098] usb 3-2: new low-speed USB device number 4 using uhci_hcd
[    4.003450] PM: Starting manual resume from disk
[    4.003460] PM: Hibernation image partition 8:21 present
[    4.003463] PM: Looking for hibernation image.
[    4.036124] PM: Image not found (code -22)
[    4.036130] PM: Hibernation image not present or could not be loaded.
[    4.067189] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[    4.067198] EXT4-fs (sdb1): write access will be enabled during recovery
[    4.231917] EXT4-fs (sdb1): orphan cleanup on readonly fs
[    4.231946] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 654755
[    4.232129] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 654689
[    4.232172] EXT4-fs (sdb1): 2 orphan inodes deleted
[    4.232177] EXT4-fs (sdb1): recovery complete
[    4.388032] usb 3-2: device not accepting address 4, error -71
[    4.500030] usb 3-2: new low-speed USB device number 5 using uhci_hcd
[    4.849464] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.908048] usb 3-2: device not accepting address 5, error -71
[    4.908141] hub 3-0:1.0: unable to enumerate USB device on port 2
[    7.930937] udevd[328]: starting version 175
[    8.375015] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    8.375032] ACPI: Power Button [PWRB]
[    8.375175] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    8.375190] ACPI: Sleep Button [SLPB]
[    8.375362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.375375] ACPI: Power Button [PWRF]
[    8.507224] parport_pc 00:0b: reported by Plug and Play ACPI
[    8.507315] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.689706] intel_rng: FWH not detected
[    8.725174] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.782364] gameport gameport0: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x201, speed 806kHz
[    8.973739] psmouse serio1: hgpk: ID: 10 00 64
[    9.132526] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.171914] iTCO_vendor_support: vendor-support=0
[    9.403648] [drm] Initialized drm 1.1.0 20060810
[    9.404893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    9.405050] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    9.590278] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[    9.594720] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[    9.849474] wmi: Mapper loaded
[    9.918396] intel8x0_measure_ac97_clock: measured 57107 usecs (2744 samples)
[    9.918403] intel8x0: clocking to 48000
[   10.400081] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a2)
[   10.402018] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   10.455126] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   10.455133] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   10.455539] [drm] nouveau 0000:01:00.0: BMP BIOS found
[   10.455547] [drm] nouveau 0000:01:00.0: BMP version 5.36
[   10.455552] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.13
[   10.458980] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   10.458989] [drm] nouveau 0000:01:00.0: DCB version 2.1
[   10.458997] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 000088b8
[   10.459004] [drm] nouveau 0000:01:00.0: DCB outp 01: 01010312 000088b0
[   10.459008] [drm] nouveau 0000:01:00.0: DCB outp 02: 02010310 000088b8
[   10.459013] [drm] nouveau 0000:01:00.0: DCB outp 03: 02020321 00000003
[   10.459323] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[   10.459331] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC7A4
[   10.459380] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB52
[   10.473550] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xC8BF
[   10.516571] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD033
[   10.516589] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD04F
[   10.516598] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xCAB9
[   10.516612] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xCAED
[   10.519061] [TTM] Zone  kernel: Available graphics memory: 447694 kiB
[   10.519068] [TTM] Zone highmem: Available graphics memory: 517298 kiB
[   10.519072] [TTM] Initializing pool allocator
[   10.519105] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM (DDR1)
[   10.519326] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[   10.519357] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   10.519383] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[   10.519416] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[   10.519523] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[   10.623535] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.623543] [drm] No driver support for vblank timestamp query.
[   10.629500] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[   10.629506] [drm] nouveau 0000:01:00.0: 0:
[   10.629512] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 405MHz
[   10.631409] [drm] nouveau 0000:01:00.0: 0xDD86: Parsing digital output script table
[   10.651718] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[   10.812713] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f7170800
[   10.812912] fbcon: nouveaufb (fb0) is primary device
[   11.484401] Console: switching to colour frame buffer device 160x64
[   11.487008] fb0: nouveaufb frame buffer device
[   11.487013] drm: registered panic notifier
[   11.487025] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   11.801618] Linux media interface: v0.10
[   11.828179] Linux video capture interface: v2.00
[   12.101071] gspca_main: v2.14.0 registered
[   12.104945] gspca_main: pac7302-2.14.0 probing 093a:2626
[   12.113083] input: pac7302 as /devices/pci0000:00/0000:00:1e.0/0000:02:06.0/usb2/2-1/input/input6
[   12.113770] usbcore: registered new interface driver pac7302
[   12.268463] usbcore: registered new interface driver snd-usb-audio
[   15.615037] Adding 876540k swap on /dev/sdb5.  Priority:-1 extents:1 across:876540k
[   15.634085] EXT4-fs (sdb1): re-mounted. Opts: (null)
[   16.032091] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   16.241815] loop: module loaded
[   25.699176] Bluetooth: Core ver 2.16
[   25.699250] NET: Registered protocol family 31
[   25.699257] Bluetooth: HCI device and connection manager initialized
[   25.699264] Bluetooth: HCI socket layer initialized
[   25.699269] Bluetooth: L2CAP socket layer initialized
[   25.700864] Bluetooth: SCO socket layer initialized
[   25.897296] Bluetooth: RFCOMM TTY layer initialized
[   25.897310] Bluetooth: RFCOMM socket layer initialized
[   25.897315] Bluetooth: RFCOMM ver 1.11
[   26.110723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.110730] Bluetooth: BNEP filters: protocol multicast
[   32.236115] 8139too 0000:02:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[  158.920283] fuse init (API version 7.17)
[  193.935998] PPP generic driver version 2.4.2
[  194.066695] NET: Registered protocol family 24
[  204.608027] eth0: no IPv6 routers present
[33621.068067] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[33621.218914] usb 2-2: New USB device found, idVendor=0e5e, idProduct=6622
[33621.218922] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[33623.868175] Bluetooth: Generic Bluetooth USB driver ver 0.6
[33623.873104] usbcore: registered new interface driver btusb